Low collaborative conference table H660 mm. Round, square, rectangular and elliptical tables for 4 to 8-person available.
Conference and work table H730 mm. Round, square, rectangular and elliptical tables 4 to 16-person available.
Pull-out tablet. Bring your work to you. Available as an option on select H660 mm high tables only.
Table glides adjust 3/4 for leveling on uneven floors. Aluminum glides include non-marring plastic inserts.
PowerPod. Convenient tabletop access to four power outlets, disguised when not in use by an accessory tray.
Wire management. Grommet with wire manager allows wires to be accessed at the tabletop while routing them down the outside of the leg to the floor.
Tabletops. 14 mm thick tops available in glass, veneer, Corian or laminate.
Recycled/recyclable cast aluminum base.
Length: 84" 120"
40”W x 84”L
40”W x 96”L
44"W x 120"L
48"W x 96"L
48”W x 120”L
Length: 120” 144”
40”W x 96”L
44"W x 120"L
48”W x 144”L
52"W x 168"L
56”W x 192”L
60”W x 216”L
60"W x 240"L
60"W x 240"L
Lendth: 60" 72"
Length: 60” 72”
Powder Coat Finishes
Chairs and table bases should be cleaned with a liquid detergent and water. Remove stubborn stains with liquid cleanser, such as Formula 409®.
Polished Aluminum
Finishes on table bases should be cleaned with a commercial powder, liquid, or paste metal cleaner and polish. Follow the manufacturer’s directions.
Fabric
Under normal use, clean with soft cloth dampened with water. For spots and spills, we recommend professional cleaning. For COM, refer to the specific cleaning instructions recommended by the fabric supplier.
Chrome
Use commercial cleanser and polish, according to manufacturer’s directions.
Leather
Under normal use, regular dusting and vacuum cleaning are all that is necessary. For spots and spills, wipe excess liquid immediately. If necessary, use lukewarm water cleaning the entire area where spot occurred and air dry. For stubborn spots or stains, use a solution of mild non-detergent soap and air dry. For butter, oil, or grease, wipe excess with dry cloth and then leave alone. The spot will dissipate into the leather. Do not apply water.
Granite/Glass
Under normal use, clean with Windex and soft cotton cloth.
SW_1 tablet surfaces
Clean with soft cloth dampened with water and soap, if needed. The use of general purpose cleaners are acceptable but must be void of citric content that has z-butoxyethanol in the formulation listing.
Laminate and Solid Phenolic
Clean with soap and water. For stubborn stains, use a non-abrasive household cleaner.
Veneers and Painted MDF
Clean regularly with mild soap and water and dry with a soft cloth. Tip: Never use ammonia-based cleaners or wax on wood surfaces.
Inspection
Tables should be inspected and maintained regularly by tightening screws and bolts, inspecting casters and glides for damage, and inspecting all moving parts for damage and wear.
Transolid/Corian
Clean regularly with mild soap and water. Dry with a soft cloth.
Carl Hansen Wood Finishes
Oil/White Pigmented Oil: Wipe clean with damp cloth. Wood should be treated twice per year on all surfaces, or as needed to remove scratches and stubborn stains. Stain/Varnish, Clear lacquer, CHS Color: Wipe clean with damp cloth.
The beauty and smart design of the standard height SW_1 Conference Table can be paired with the SW_1 Chair. Or meet at the next level with the SW_1 Collaborative Table complemented by the low-profile SW_1 Lounge. Seven centimeters lower than standard tables, it elevates collaboration.
Design — Scott Wilson & MINIMAL
SW_1 redefines the concept of collaborative workspaces with guest and conference chairs, lounge seating and tables.
